SSAUTOCHROME FORD RANGER 2.3L T3/T4 T70 FULL TURBO KIT

Build your Ford 2.3L turbo project around one serious performance package. The SSAutoChrome Ford Ranger 2.3L T3/T4 T70 Full Turbo Kit combines the major turbo-system components needed for a custom Ford Ranger 2.3L, Thunderbird Turbo Coupe 2.3L or compatible Ford 2.3L performance build.

At the center of the system is a T3/T4 Hybrid T04E T70 turbocharger paired with a stainless steel top-center-mount turbo manifold, external wastegate, 2-piece charge/intercooler piping, 2.5-inch V-band turbo downpipe, braided oil-feed line, oil-drain hardware, flanges, gaskets, fittings, hoses and clamps.

If you're searching for a Ford Ranger 2.3 turbo kit, Ford 2.3 turbocharger kit, Ford 2.3 T3/T4 turbo kit, Thunderbird Turbo Coupe turbo kit, Ford 2.3 Lima turbo kit or T70 Ford turbo system, this package gives you the major hardware needed to start building a serious boosted Ford 2.3L combination.

⚡ FORD 2.3 TURBO KIT — QUICK SPECS

 WHAT'S INCLUDED IN THE FORD 2.3L FULL TURBO KIT?

• ✔ T3/T4 Hybrid T04E T70 Turbocharger
• ✔ Stainless Steel Top-Center-Mount Turbo Manifold
• ✔ External Wastegate — 35mm / 38mm depending on supplied configuration
• ✔ 2 Pieces Intercooler / Charge Piping
• ✔ 2.5" V-Band Turbo Downpipe
• ✔ Braided Turbo Oil-Feed Line
• ✔ Turbo Oil-Drain Fitting
• ✔ Wastegate Flange Kit
• ✔ Turbo / Wastegate Flanges & Gaskets
• ✔ Approximately 10 Assorted Turbo Fittings / Barbs
• ✔ Associated Hose & Clamp Hardware As Supplied
• ✔ BOV / Wastegate Flange Hardware As Supplied

? T3/T4 HYBRID T04E T70 TURBOCHARGER

The heart of the package is the included T3/T4 Hybrid T04E T70 turbocharger. This performance-oriented turbo provides the airflow capability and T3-style turbine configuration desired for custom Ford 2.3L turbo builds.

COMPRESSOR SPECIFICATIONS

• Compressor Trim: 57
• Compressor Inducer: 56.6mm
• Compressor Exducer: 75mm
• Compressor A/R: 0.82
• Compressor Inlet: 3.0"

TURBINE SPECIFICATIONS

• Turbine Inlet: T3 Twin-Scroll
• Turbine Outlet: 2.5" V-Band
• Turbine Trim: 61.6
• Turbine Inducer: 74.4mm
• Turbine Exducer: 58.4mm
• Turbine A/R: 0.70
• Turbine Outlet: 79.8mm OD / 63mm ID

ADDITIONAL TURBO DETAILS

• T3/T4 Hybrid T70 configuration
• Oil-lubricated floating-bearing system
• 1/8" NPT oil-feed inlet
• Heavy-duty cast turbo housings
• Balanced and tested assembly

 STAINLESS STEEL TOP-CENTER-MOUNT TURBO MANIFOLD

The supplied stainless steel tubular turbo manifold positions the turbocharger in a top-center-mount configuration and forms the foundation of the turbo system.

• ✔ Stainless steel tubular construction
• ✔ Top-center-mount turbo location
• ✔ T3/T4 compatible turbo configuration
• ✔ External wastegate configuration
• ✔ Performance-oriented exhaust routing
• ✔ Designed for compatible Ford 2.3L custom turbo applications

 EXTERNAL WASTEGATE BOOST CONTROL

An external wastegate is included for boost-control integration. The supplied configuration may use a 35mm or 38mm wastegate depending upon the selected/current kit configuration.

Final boost pressure depends upon wastegate spring pressure, boost-control setup, exhaust configuration, turbo configuration and engine calibration.

2.5" V-BAND TURBO DOWNPIPE INCLUDED

This package includes a 2.5-inch turbo downpipe designed around the supplied turbo/manifold configuration.

• ✔ 2.5" downpipe included
• ✔ V-band turbo connection
• ✔ Designed around the supplied turbo/manifold arrangement
• ✔ Provides the starting exhaust path from the turbocharger

 TURBO OIL FEED & DRAIN COMPONENTS

• ✔ Braided turbo oil-feed line
• ✔ Turbo oil-drain fitting
• ✔ Approximately 10 assorted turbo fittings / barbs
• ✔ Associated hose and clamp hardware as supplied

Correct turbo oil supply and unrestricted gravity-drain routing are critical to turbocharger operation and service life. Oil pressure, feed restriction and drain routing must be verified for the specific installation.

 FORD 2.3L TURBO APPLICATIONS

• Ford Ranger 2.3L performance / turbo-conversion builds
• Ford Thunderbird Turbo Coupe 2.3L Turbo
• Compatible Ford 2.3L performance applications
• Compatible Ford 2.3L Lima turbo projects
• Custom Ford 2.3L T3/T4 turbo builds

⚙️ FUEL SYSTEM & PROFESSIONAL TUNING

Adding a turbocharger substantially changes engine airflow, fuel demand, cylinder pressure and operating temperature. A properly configured fuel system and appropriate engine-management calibration are required.

Supporting modifications depend upon engine condition, desired boost pressure, horsepower target and intended vehicle use.

⭐ WHY CHOOSE THE SSAUTOCHROME FORD 2.3 TURBO KIT?

• ✔ T3/T4 Hybrid T04E T70 turbocharger included
• ✔ Stainless steel top-center-mount turbo manifold
• ✔ External wastegate included
• ✔ 2-piece charge/intercooler piping included
• ✔ 2.5" V-band downpipe included
• ✔ Braided turbo oil-feed line included
• ✔ Turbo oil-drain hardware included
• ✔ Flanges, gaskets, fittings and hardware included as supplied
• ✔ Strong starting package for custom Ford Ranger 2.3 turbo builds
• ✔ Excellent foundation for Ford 2.3 Turbo Coupe performance projects

 FORD RANGER 2.3 TURBO KIT FAQ

What turbo kit can I use for a Ford Ranger 2.3L?

The SSAutoChrome Ford 2.3L T3/T4 T70 Full Turbo Kit is designed as a performance starting package for compatible Ford Ranger 2.3L custom turbo builds. It includes the turbocharger, stainless turbo manifold, external wastegate, charge piping, downpipe and turbo oil hardware. Vehicle-specific fabrication and tuning may be required.

Does this Ford 2.3 turbo kit include the turbocharger?

Yes. The package includes a T3/T4 Hybrid T04E T70 turbocharger.

Does this Ford Ranger turbo kit include an intercooler?

No. The kit includes 2 pieces of intercooler / charge piping, but the actual intercooler core is NOT included.

Does the kit include a turbo manifold?

Yes. A stainless steel tubular top-center-mount turbo manifold is included.

Does the Ford 2.3 turbo kit include a downpipe?

Yes. The package includes a 2.5-inch V-band turbo downpipe.

What turbocharger comes with the Ford 2.3L turbo kit?

The package includes a T3/T4 Hybrid T04E T70 turbocharger with a 56.6mm compressor inducer, 75mm compressor exducer, T3 twin-scroll turbine inlet and 2.5-inch V-band turbine outlet.

Does this kit include an external wastegate?

Yes. An external wastegate is included. The supplied size may be 35mm or 38mm depending upon the current kit configuration.

Is this Ford Ranger 2.3 turbo kit a direct bolt-on kit?

No. This is a performance-oriented custom turbo package. Installation requirements vary by chassis, engine configuration and existing modifications. Fabrication and vehicle-specific modifications may be required.

Does a Ford 2.3 turbo conversion require tuning?

Yes. A properly configured fuel system and engine-management calibration are required for a turbocharged engine. The exact supporting modifications depend upon the engine, boost level and intended power output.

Will this work on a Thunderbird Turbo Coupe 2.3L?

The package is intended for compatible Ford 2.3L applications, including Thunderbird Turbo Coupe performance builds. Verify the specific vehicle configuration and installation requirements before ordering.

Is this a Ford 2.3 Lima turbo kit?

The package is designed around compatible Ford 2.3L turbo applications and may be used in appropriate Ford 2.3L Lima-based performance projects. Because these engines appear in multiple chassis and configurations, fitment and fabrication requirements should be verified before purchase.